Polling Transmission Clear Report - Ricoh FAX Option Type 3030 Operating Instructions Manual

Polling Transmission Clear Report

This report allows you to verify Polling Transmission has taken place.
If E-mail TX Results is programmed in a Quick Operation key, you can have the
report e-mail sent after transmission.
Important
❒ This report is not printed if the User Parameters (switch 11, bit 7) in the Fac-
simile Features menu are set to allow the stored originals to be repeatedly
sent.
Note
❒ You can turn this function on or off with the User Parameters (switch 03, bit
6) in the Facsimile Features menu.
❒ You can have a portion of the sent image printed on the report with the User
Parameters (switch 04, bit 7) in the Facsimile Features menu.
❒ You can check the result of Polling Transmission with the Journal.
❒ To view the report without text disruption, select a font of even character
width in your e-mail application's settings.
❒ You can display a destination with the User Parameters (switch 04, bit 4) in
the Facsimile Features menu.
❒ You can indicate the sender's name with the User Parameters (switch 04, bit
5) in the Facsimile Features menu.
Reference
p.204 "Printing the Journal"
"Facsimile Features", General Settings Guide
Polling Transmission
121
2