Setting A Scan Area - Ricoh FAX Option Type 3030 Operating Instructions Manual

Transmission
❒ When setting bound originals (books, magazines, etc.), you can select to have
either the left or right page sent first with the User Parameters (switch 06, bit 6)
in the Facsimile Features menu. See "Book Fax".
❒ For acceptable types of originals, see "Acceptable Original Sizes", "Paper Size
1
and Scanned Area" and "Original Sizes Difficult to Detect".
❒ For how to place two-sided originals, see "Two-Sided Transmission (Double-
Sided Transmission)".
Reference
p.14 "Sending multiple originals using the exposure glass (Memory Trans-
mission)"
p.20 "Sending multiple originals using the exposure glass (Immediate Trans-
mission)"
p.31 "T.37 Full Mode"
p.34 "Setting a Scan Area"
p.38 "Acceptable Original Sizes"
p.39 "Paper Size and Scanned Area"
p.41 "Original Sizes Difficult to Detect"
p.42 "Transmission with Image Rotation"
p.126 "Book Fax"
p.128 "Two-Sided Transmission (Double-Sided Transmission)"
"Facsimile Features", General Settings Guide
"Placing Originals", Copy/Document Server Reference

Setting a Scan Area

Normally, a placed original is scanned according to the automatically detected
size. If a scan area is specified, the original is scanned accordingly. Thus, origi-
nals can be sent without extra space or blank margins.
Note
❒ When placing different size originals into the ADF, adjust the document
guide to the largest original.
❒ Small-size originals may be sent at a slight slant since they do not match the
document guide.
Reference
p.41 "Original Sizes Difficult to Detect"
34