Memory Reception - Ricoh FAX Option Type 3030 Operating Instructions Manual

Fax option facsimile reference
Table of Contents

Advertisement

Reception
Reference
p.43 "Resolution"
p.152 "Memory Reception"
p.153 "Substitute Reception"
p.170 "Printing Options"

Memory Reception

The machine waits until all pages of the document have been received into mem-
3
ory before printing it.
Important
❒ About one hour after the machine is turned off, all fax documents stored in
memory are lost. If any documents are lost in this way, a Power Failure Re-
port is automatically printed when the operation switch is turned on. Use this
report to identify lost documents. See "Troubleshooting When Using the Fac-
simile Function", Troubleshooting.
❒ The machine may not be able to receive large numbers of documents or doc-
uments with high data content. In such cases, it is recommended that you
switch off Combine Two Originals, Multi-copy Reception, Reverse Order
Printing, and Two-Sided Printing (optional) or install the optional expansion
memory.
❒ The machine may not be able to receive fax documents when free memory
space is low.
❒ If free memory reaches 0% during Memory Reception, any further reception
becomes impossible and the current communication is terminated.
Note
❒ Normally this machine receives documents by Immediate Reception. But
Memory Reception is used when Combine Two Originals, Multi-copy Recep-
tion, Reverse Order Printing, or Two-Sided Printing (optional) is active.
❒ If you have selected Store for Reception File Setting, received document is
saved on the hard disk and will not be printed. You can print those docu-
ments by operating the machine or a connected computer, as necessary.
152

Advertisement

Table of Contents
loading

This manual is also suitable for:

3030

Table of Contents