Programming/Changing Transfer Boxes - Ricoh Aficio MP 3500 Operating Instructions Manual

Programming/Changing Transfer Boxes

This section describes how to program and change Transfer Boxes.
This function turns the machine into a fax relay station. Documents sent with a
SUB Code that matches the SUB Code programmed as a Transfer Box are re-
ceived, and then relayed to a programmed receiver.
Since documents can be sent to multiple destinations in a single transfer request,
you can economize on call charges when sending to distant destinations.
Inform the Requesting Party of the SUB Code assigned to the Transfer Box.
When they want to have a document transferred by your machine, ask them to
send the document using SUB Code Transmission and specifying this SUB
Code. If a password has also been programmed, inform them of this too, and ask
them to enter it as the SID code.
You can store the following items:
• Box name (required)
Up to 20 characters
• SUB Code (required)
Up to 20 characters long and can be composed of digits 0-9, "#", "*", and spaces
(the first character cannot be a space).
• End Receiver (required)
You can store five End Receivers (destinations to which documents are for-
warded) for each box. Specify End Receivers using a single or group destina-
tion programmed in the destination list beforehand.
• Password (optional)
Up to 20 characters long and can be composed of digits 0-9, "#", "*", and spaces
(the first character cannot be a space).
When programming a password, a mark is displayed in front of the Box
name.
A
Press [Facsimile Features].
B
Press [Administrator Tools].
C
Press [TNext].
D
Press [Box Setting].
Box Settings
4
159