Hitachi SJ2002 Series Instruction Manual page 157

2. Programming using the CF switches. Set the speed by following these steps:
a. Turn the Run command OFF (Stop Mode).
b. Turn inputs ON to select desired Multi-speed. Display the value of F001 on the
digital operator.
c. Set the desired output frequency by pressing the
d. Press the key once to store the set frequency. When this occurs, F001
STR
indicates the output frequency of Multi-speed n.
e. Press the key once to confirm that the indication is the same as the set
FUNC.
frequency.
f. Repeat operations in 2. a) to 2. e) to set the frequency of other Multi-speeds. It
can be set also by parameters A020 to A035 in the first procedure 1. a) to 1. d).
SJ200 Inverter
2
and 2 keys.
1
4–15