Voice Messages (Message Waiting Indicator) - Grandstream Networks GXP1160 User Manual


Initiate a conference call.
 Establish 1 call;
 Press CONF key
 Dial the number and press SEND key
 Press CONF key

Split and Re-conference.
 During the conference, press HOLD key
will be put on hold separately;
 Press FLASH key
 If users would like to re-establish conference call, press the ReConf softkey.

Cancel Conference.
 If users decides not to conference after establishing the second call, press EndCall softkey;
 This will end the second call and the screen will show the first call on hold.

End Conference.
 Press HOLD key
calls on hold; Or
 Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
Note:

The party that starts the conference call has to remain in the conference for its entire duration, you can
put the party on mute but it must remain in the conversation. Also, this is not applicable when the
feature "Transfer on Conference Hangup" is turned on.

The option "Disable Conference" has to be set to "No" to establish conference.

When using Easy Conference Mode, use SEND key
using #, even when # could be used as SEND in normal phone calls.

VOICE MESSAGES (MESSAGE WAITING INDICATOR)

A blinking red MWI (Message Waiting Indicator) indicates a message is waiting. Dial into the voicemail box
to retrieve the message by entering the voice mail number of the server or pressing the MESSAGE key
FIRMWARE VERSION 1.0.7.4
and a new line will be brought up;
to establish the second call;
or press the ConfCall softkey to establish the conference.
. The conference call will be split and both calls
to resume the 2-way conversation with the second established call;
to split the conference call. The conference call will be ended with both
GXP1160/GXP1165 USER MANUAL
to dial out the second call instead of
Page 25 of 67