Voice Messages (Message Waiting Indicator); Voicemail - Grandstream Networks GXP1610 User Manual

GXP1610/GXP1620/GXP 1625 will stay in the existed conference.
Note:
The party that starts the conference call has to remain in the conference for its entire duration, you

can put the party on mute but it must remain in the conversation.
The option "Disable Conference" has to be set to "No" to establish conference.

When using Ea sy Conference Mode, use SEND key to dial out the second call instead of using #,

even when # could be used as SEND in normal phone calls.
For 3-way conference, the host hangs up the phone will end the conference. If users wants to keep

the rest 2 parties stay in conference aft er the host hangs up ,go to Web GUI - >Account- > Call
Settings > Transfer on conference Hangup, check "Yes" and save the change.

VOICE MESSAGES (MESSAGE WAITING INDICATOR)

A blinking red MWI (Message Waiting Indicator) on the t op right corner of the phone indicates a message
is waiting. Dial into the Voicemail box to retrieve the message by entering the voice mail number of the
server or pressing the Voicemail button (Voice Mail Us er ID has to be properly configured as the voice
mail number under Web GUI->Account x->General Settings). An IV R will prompt the user through the
process of message retrieval.

VOICEMAIL

A blinking red LE D indicator on the top right corner of the GXP1610/GXP 1620/GXP1625 indicates a
message is waiting. Go to Web GUI- >Account - >General Settings to configure Voice Mail UserID.
To retrieve the voicemail:
 Press the hard key
 Select the account and confirm to access the dial-up interface, make operations according to the
voice prompt.
 Enter the account and password which is configured on SIP PBX.
The steps above are for the situation that both accounts are configured, if configured only one account,
there is no need for users to select account but go to the dial-up interface directly.
For each account, the Voicemail User ID can be set up under Web GUI->Account X-> General Settings:
"Voice Mail UserID". This is the number that will be dialed out to access voicemail message when tapping
on the account in Voice Mail screen.
Firmware Version 1.0.0.35
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
to dial into the voicemail box;
GXP1610/GXP1620/GXP1625
User Guide
Page 29 of 36