Voice Messages (Message Waiting Indicator); Shared Call Appearance (Sca) - Grandstream Networks GXP17 Series User Manual

3. Dial the number and press SEND key to establish the second call.
4. Press CONF key or press the ConfCall softkey to establish the conference.
Join more parties in established conference call.
1. Establish conference call.
2. Press CONF key and a new line will be brought up using the same account.
3. Dial the number and press SEND key to establish the second call.
4. Press CONF key or press the ConfCall softkey to join the new party in the established conference.
Split and Re-conference
1. During the conference, press HOLD softkey. The conference call will be split and both calls will be put on hold separately with 2
LINE keys blinking in green.
2. Select 1 LINE key and press to resume the 2-way conversation.
3. If users would like to re-establish conference call, before 1 separate LINE is selected, press the ReConf softkey right after the
conference call is split.
Cancel Conference
If users decide not to conference after establishing the second call, press EndCall softkey instead of the ConfCall softkey/CONF
key.
This will end the second call and the screen will show the first call on hold.
End Conference
Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
Notes:
The party that starts the conference call has to remain in the conference for its entire duration, you can put the party on mute but
it must remain in the conversation. Also, this is not applicable when the feature "Transfer on Conference Hang-up" is turned on.
The option "Disable Conference" has to be set to "No" to establish conference.
When using Easy Conference Mode, use SEND key to dial out the second call instead of using #, even when # could be used as
SEND in normal phone calls.
Target Softkey to Select Lines During Transfer / Conference Calls
When having multiple calls on the same line, and users tried to transfer or conference the calls, a "Target" softkey will appears and
when pressed, it will redirect user to the menu that show all the calls on that line. Users can simply select the account to do
Transfer/Conference on for performing Blind Transfer/Conference.

Voice Messages (Message Waiting Indicator)

A blinking red MWI (Message Waiting Indicator) on the top right corner of the phone indicates a message is waiting. Meanwhile, a
message box symbol will show in the front of the specific account. Dial into the voicemail box to retrieve the message by entering the
voice mail number of the server or pressing the Voicemail button (Voice Mail User ID has to be properly configured as the voice mail
number under Web GUI��Account x��General Settings). An IVR will prompt the user through the process of message retrieval.

Shared Call Appearance (SCA)

The GXP1760/GXP1760W/GXP1780/GXP1782 phone supports shared call appearance by Broadsoft standard. This feature allows
members of the SCA group to share SIP lines and provides status monitoring (idle, active, progressing, hold) of the shared line. When
there is, an incoming call designated for the SCA group, all of the members of the group will be notified of an incoming call and will be