Gibson Dark Fire Applications Quick Start Manual page 8

Listen to the Magnetic Pickups
We'll now listen to only the magnetic pickups. This is an excellent way to hear how the
Chameleon Tone Technology options affects the magnetic pickup sound as you try out
different Chameleon Tone settings.
1. Unmute the Guitar channel (Mute switch label goes from yellow to white).
2. Make sure Gang is lit green on the Analog Out 1 and Out 2 channels.
3. Turn up the Analog Out 1 and 2 faders to a comfortable listening level. Note: For the
best signal-to-noise ratio and dynamic range, Gibson highly recommends adjusting
levels at your monitoring system, and leaving the Analog Out 1 and Out 2 faders all the
way up.
4. To check out the Chameleon Tone Technology options, rotate the MCK until the "C"
lights up, then press momentarily on the MCK knob to enter Chameleon mode.
5. Rotate the MCK counter-clockwise to E (Gibson), and check out the sound. Then try the
other positions and play for a little bit (A = Blues, D = Funky, G= Twang, B = Acoustic, e
= L5, rotating arrow = Rock, b symbol = Metal). Have fun!
8