Audio Tab - Gibson Dark Fire Applications Quick Start Manual

Windows Audio and MIDI Setup

Audio Tab

Click on the Preferences Audio tab and select the following.
Driver: ASIO
Device: ASIO Gibson RIP
Sample rate: As desired (usually 44100)
Latency: This is a read-only value. To change the latency, click on ASIO Config under
Device. This opens the Echo ASIO Configuration window, where you can adjust the ASIO
buffer size. Lower values result in lower latencies (i.e., delay between hitting a note on your
guitar and hearing it). Adjust for the lowest latency consistent with audio quality (no clicks,
pops, dropouts, or radical audio changes). Start with a setting around 256 samples. If you
experience audio problems, increase latency as your first troubleshooting step.
12