Gibson Dark Fire Applications Quick Start Manual page 17

The most useful option connects Guitar Rig 3's stereo outs to the RIP's stereo outputs:
Guitar Rig 3 Out1+2 L
Guitar Rig 3 Out1+2 R
If you're feeding a mono out instead of stereo, you can use the following assignment to connect
Guitar Rig 3's left output to the RIP left output. However, you will lose any stereo imaging
created within Guitar Rig 3 (e.g., reverb, stereo delay).
Guitar Rig 3 Out1+2 L
Guitar Rig 3 Out1+2 R
MIDI Tab
Using MIDI is a more advanced application that is explained in Guitar Rig 3's full
documentation. For the purposes of this Quick Start, it is not necessary to change any values
here.
RIP (3987) Out 0
RIP (3987) Out 1
RIP (3987) Out 0
- not connected -
17