Gibson Dark Fire Applications Quick Start Manual page 7

7. Pull up on the Dark Fire MCK and tune the guitar. There is complete documentation on
tuning functions at http://www.gibson.com/darkfire.
8. Strum the strings. You should see signal in the meters on the eight Dark Fire channels
(Guitar, Piezo, Low E, A, D, G, B, High E). If not, unplug the stereo cable connecting the
Dark Fire to the RIP, wait a few seconds, then plug in again. If you still don't see a
signal, refer to the troubleshooting sections for the RIP and the Dark Fire.
7