Gibson Dark Fire Applications Quick Start Manual page 16

Guitar Rig 3's input module can switch between two different inputs, or accept both at the
same time. Each input field (Guitar Rig 3 In1+2 L and Guitar Rig 3 In1+2 R) lets you select a
particular Dark Fire output. In stand-alone mode, it's unlikely you would want to select an
individual string for an input. Gibson recommends the following routing.
Guitar Rig 3 In1+2 L
Guitar Rig 3 In1+2 R
Switching Guitar Rig's input to L selects the guitar (magnetic pickups) sound, R selects the
piezo sound, and BOTH feeds both sounds into Guitar Rig.
For reference, the following shows how RIP outputs are named in Guitar Rig 3.
Guitar RIP (3987) In 0
Piezo RIP (3987) In 1
Low E RIP (3987) In 2
A RIP (3987) In 3
D RIP (3987) In 4
G RIP (3987) In 5
B RIP (3987) In 6
High E RIP (3987) In 7
Next, click on the Outputs button.
RIP (3987) In 0 (Guitar/megnetic pickups signal)
RIP (3987) In 1 (Piezo signal)
16