Gibson Dark Fire Applications Quick Start Manual page 15

Macintosh Audio and MIDI Setup
Audio Tab
Click on the Audio tab, and select the following.
Driver: CoreAudio
Device: RIP (3987) (8 in, 2 out)
Sample rate: As desired (usually 44100)
Latency: Lower values result in lower latency (i.e., the delay between hitting a note on your
guitar and hearing it). Adjust this value for the lowest latency consistent with audio quality—no
clicks, pops, dropouts, or radical changes in audio quality or level. Start with a setting around
256 samples. If you experience audio problems, increase latency as your first troubleshooting
step.
Routing Tab
Click on the Routing tab, then on the Inputs button.
15