Optional Accessories; All Servo System - 1 (Digital Focus,Digital Zoom) - FujiFilm UA13x4.5BERD-S9 Operation Manual

■ All Servo System - 1
ACCESSORY NAME
①
Focus Position Demand Unit
② Zoom Rate Demand Unit
③ Connection Cable
④ Mounting Clamp
⑤
Lens
Configuration
③
④

OPTIONAL ACCESSORIES

(Digital Focus,Digital Zoom)
MODEL
EPD-4A-E12A
ERD-10A-D01M
EBF-1
MCA-06BC
All Servo System - 1
⑤
①
④
Control unit for focus operation.
(Operation angle of the knob is two turn.)
Control unit for zoom operation and preset operation.
Cable for electrical connection between lens and EPD.
Used with ERD,EPD for their installation.
Note：
②
- 21 -
REMARKS
The speed of the zoom achieved by operating the
ZOOM RATE DEMAND UNIT is the speed that
reflects both the setting established for the zoom
maximum speed control knob of the drive unit and
the setting established for the Speed Control Knob
of the ZOOM RATE DEMAND UNIT.
Depending on the setting established for the zoom
maximum speed control knob, the operation time of
the servo may be longer than the value given in the
specifications.
For further details concerning the speed control
knob of the ZOOM RATE DEMAND UNIT, refer to
the operation manual of the ZOOM RATE
DEMAND UNIT.