Usb Share Permission; To Configure The Privilege Levels For A Usb Share - Freecom SILVER STORE 2-DRIVE NAS User Manual

EN

USB Share Permission

Use the USB Share Permission tab to set the access permission for the USB ports of the
SilverStore. There are three privilege levels an administrator can assign to a user or group:
• Full Access
• Read Only
• No Access
When there is a conflict in the access rights of a user or group, SilverStore will use the
following rule to handle the conflict:
• No Access has the highest priority.
• Read Write + Read Only = Full Access.
If access permission is assigned to a user or group, the full access, read only, and no access
icons appear on the USB Share Permission page. You can move your mouse over the icon
to view the user or group list.

To configure the privilege levels for a USB share:

1. Click the USB Permission tab.
2. Select a USB share name, then click the Modify Permission icon located on the lower
left corner of the Access page.
3. Make the changes you want, then click Submit.
FREECOM SILVER STORE 2-DRIVE NAS
58