Domain Mode; To Change The Silverstore’s Workgroup Name; To Join The Silverstore To A Domain - Freecom SILVER STORE 2-DRIVE NAS User Manual

EN
To change the SilverStore's workgroup name:
1. Click the Workgroup tab.
2. Click the Workgroup radio button.
3. In the Workgroup Name box, enter the workgroup name.
4. Click Submit.

Domain Mode

If your network uses a domain (i.e., has Windows Automated Deployment Services), you
may wish to connect the SilverStore as a domain member. When configured as a domain
member, the SilverStore requests ADS (Automated Deployment Services) to authenticate
users. Domain mode has a more restrictive security level, network users must enter
appropriate passwords before gaining access to SilverStore.
When joining a domain, SilverStore needs the authorization of the domain's administrator.
You must enter the Domain Name, Administrator and Administrator Password for the
authorization.
NOTE: The local user and domain user share same access control if both their
usernames are similar (not applicable in FTP service).

To join the SilverStore to a domain:

1. Click the Workgroup tab.
2. Click the Domain Membership radio button.
3. In the Domain NetBIOS name box, enter the domain netbios name.
4. In the AD Server name box, enter the server name.
5. In the Domain box, enter a fully qualified AD domain name, for example, swlab-test.
com.
6. To obtain a domain server IP address automatically, click the "Obtain domain server
address automatically" check box. Or, clear this check box to manually enter the domain
IP address.
FREECOM SILVER STORE 2-DRIVE NAS
37