To Enable The Nfs File Service On The Silverstore; To Use Nfs To Access The Silverstore - Freecom SILVER STORE 2-DRIVE NAS User Manual

FREECOM SILVER STORE 2-DRIVE NAS
EN
We recommend using this feature, otherwise you always need to know the WAN IP of your
router to access the SilverStore via FTP from the internet.
Use any FTP client software or open your browser and enter
ftp://USERNAME:USERPASSWORD@YOUR_INTERNET_IP
or
ftp://USERNAME:USERPASSWORD@YOUR_DYNDNS_HOST.
USERNAME = your username
USERPASSWORD = your user password
YOUR_INTERNET_IP = your WAN IP address
YOUR_DYNDNS_HOST = your Dynamic DNS address

To enable the NFS file service on the SilverStore:

1. Click the Linux Network (NFS) tab.
2. Click the Linux Network Service Enable check box. The IP Allowed box appears.
3. Enter the IP filters that are allowed for NFS service, then click Add to add a new IP filter.
4. Click Submit.

To use NFS to access the SilverStore:

The mount point for NFS share is: /nfs/SHARENAME,
For example: /nfs/Public.
35