Basic Setup; To Configure The Silverstore Settings - Freecom SILVER STORE 2-DRIVE NAS User Manual

EN

Basic Setup

Use the Basic Setup tab to configure basic device settings, such as set the device name, enter
a device description, configure the time zone, and set date and time for the SilverStore.

To configure the SilverStore settings:

1. Click the Device Setup tab.
2. In the Device Name field, enter a name for the SilverStore. The name can contain up
to 15 characters, including alphabetic, numeric, underscore, space, and most special
characters.
NOTE: The default device name is: SilverStore. The device name is used to
identify the SilverStore storage appliance connected to the network. After
setting the device name, it will appear in the My Network Places on your
computer (My Network Places/Entire Network/Microsoft Windows Network/
[Workgroup Name]/[Device Name], where [Device Name] is the name of the
SilverStore storage appliance).
To connect to multiple SilverStore on the same network, make sure to specify
a unique device name for each system. Renaming a SilverStore will force all
your network computers to remap their shared network resources. Change
name only when necessary.
FREECOM SILVER STORE 2-DRIVE NAS
24