Add And Remove Mapped Shares; Start Recovery Procedure; To Restore Your Settings; Search Again For Available Freecom Network Devices - Freecom SILVER STORE 2-DRIVE NAS User Manual

EN

Add and remove mapped shares

You can assign a drive letter to shared folders on your SilverStore 2-Drive NAS. This allows
you to access files in Windows more quickly.

Start recovery procedure

This procedure can reset and repair a SilverStore 2-Drive NAS to factory default settings if
you cannot access your SilverStore 2-Drive NAS anymore.
To restore your settings, please proceed as follows:
a) Enable the Recovery mode by clicking 'Start the recovery procedure' in the Freecom
Network Storage Assistant.
b) Turn the SilverStore 2-Drive NAS off.
c) Use a pointed object to carefully press the 'Reset' button. It is located next to the AC
power slot on the back of the SilverStore 2-Drive NAS.
d) Keep the 'Reset' button pressed down and turn device on again.
e) Wait until white LED goes off (ca. 1 second), then release the 'Reset' button.

Search again for available Freecom Network devices

Click here to repeat the search for your SilverStore 2-Drive NAS if it was not detected during
the first search. Please make sure that your network is configured as described above in
this manual and that all cables are properly attached.
FREECOM SILVER STORE 2-DRIVE NAS
15