Iscsi; To Configure The Iscsi Service - Freecom SILVER STORE 2-DRIVE NAS User Manual

FREECOM SILVER STORE 2-DRIVE NAS
EN

iSCSI

Use the iSCSI tab to enable the iSCSI (Internet Small Computer System Interface) or iSNS
(Internet Storage Name Service) service, create an iSCSI device, set up an iSCSI target, and
create an iSCSi initiator.
iSCSI is an IP-based standard for linking data storage devices over a network and transferring
data by carrying SCSI commands over IP networks.

To configure the iSCSI service

1. Click the iSCSI tab.
2. Click the Service subtab.
3. In the iSCSI Device section, click the Enable check box.
4. In the Port box, enter port number used for the iSCSI service.
5. In the iSNS section, click the Enable check box to enable automated discovery,
management and configuration of iSCSI devices.
6. In the IP Address box, enter the IP address of the iSNS server.
7. Click Submit.
43