Dynamic Dns - Freecom SILVER STORE 2-DRIVE NAS User Manual

EN
7. In the Administrator box, enter the administrator's user name.
8. In the Password box, enter the administrator's password.
NOTE: The administrator user name and password can contain up to 15
characters, including alphabetic, numeric, underscore, space, and most special
characters. Both the administrator user name and password are case sensitive
and should be entered exactly in the same way each time.
9. Click Submit.

Dynamic DNS

To set up Dynamic DNS:
1. Click the Dynamic DNS tab.
2. Next to Service activate the Enable check box.
Please check in your router configuration that the ports for the required services (e.g.
port 21 for FTP) are forwarded to the IP address of your SilverStore.
3. Select your Dynamic DNS service provider from the drop-down menu.
4. Enter the domain name (URL), for example mydomain.dynalias.com; you registered
with your DDNS (Dynamic DNS) service provider.
5. Enter the user name and password you used to set up your Dynamic DNS account.
6. Click Submit. You can now log in to the SilverStore via a Web browser using the domain
name.
NOTE: When connecting to the SilverStore using a Web browser, make sure
to include "https://" if you originally set the Web Access Protocol to HTTPS.
Otherwise, only the name is required in the browser's address bar.
FREECOM SILVER STORE 2-DRIVE NAS
38