To Manually Configure The Ip Settings - Freecom SILVER STORE 2-DRIVE NAS User Manual

FREECOM SILVER STORE 2-DRIVE NAS
EN

To manually configure the IP settings:

NOTE: If you are connected to a home network, contact your Internet Service
Provider (ISP) to obtain the static IP address.
1. Click the LAN tab.
2. Clear the Obtain IP address automatically check box next to Network.
3. In the IP address box, enter a valid IP address.
4. In the Subnet Mask drop-down menu, select a subnet mask.
5. In the Default Gateway box, enter the IP address of the gateway or router.
6. Clear the Obtain DNS server address automatically check box.
7. In the Preferred DNS box, enter the IP address of the DNS server.
8. In the Alternate DNS box, enter the second DNS address.
9. Click Submit.
10. You must restart SilverStore for the system to change to static IP address.
32