EN
Default RAID configuration
The default RAID configuration for each hard drive installed on the SilverStore is as follows:
•
If only one drive is installed in an empty drive bay, the default RAID configuration is span.
•
If two hard drives are installed in the SilverStore, the default RAID configuration is mirror.
To create a volume:
1. Click the Volume tab.
2. Click the Create Volume icon.
3. In RAID configuration, select a hard drive configuration. The default logical volume
name for SilverStore is DataVolume.
NOTE: Selecting RAID configuration erases all the disk contents including logical
volumes and all shared folders and their subfolders and files. Be sure to backup
all data before configuring SilverStore's hard drives for RAID.
4. Click Submit.
FREECOM SILVER STORE 2-DRIVE NAS
42