Table of Contents
Advertisement
Chapter 5 NVIDIA RAID Introduction
14. Select the desired type of RAID array you want to convert. Then Select Next.
15. You are prompted to select the desired Free Disk(s) to add to the bootable RAID
array. Click Finish.
At this point, NVRAID starts converting the single disk RAID array into a multi-disk
RAID array in a bootable format.
Note: Conversion may take 1-2 hours depending on disk size.
II) The user must create a combination installation CD that includes Windows
2000 and SP3 or SP4 fixes integrated in. To create the combination installation
CD, refer to the following website:
http://www.microsoft.com/windows2000/downloads/servicepacks/sp4/HFdeploy.
htm
Note: If the end user chooses not to install Windows 2000 Service Pack 3 or 4, RAID
is still supported on Windows 2000. However, the end user will not be able to create
a bootable RAID volume.
70
Hide quick links:
Advertisement
Table of Contents
