Power Supply - Foxconn NF4UK8AA series User Manual

Power Supply

This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting
the power supply.
ATX Power Connector: PWR1
PWR1 is the ATX power supply connector.
Make sure that the power supply cable
and pins are properly aligned with the
connector on the motherboard. Firmly
plug the power supply cable into the con-
nector and make sure it is secure.
ATX 12V Power Connector: PWR2
The 4 pin ATX 12V power supply connects
to PWR2 and provides power to the CPU.
AUX PEX PWR connector: J2A1
This connector is auxiliary power for
the motherboard.
Attention:
We strongly recommend you use
24-pin power supply. If you want to
use 20-pin power supply, you need
to align the ATX power connector
according to the right picture.
Chapter 2 Installation Instructions
+5V
GND
GND
1
13
+3.3V GND
-12V GND
PSON
ATX 24-pin Power Connector
G N D
12V
ATX 12V Power Connector
12V
G N D
G N D
5V
+5V_AUX
GND +12V +3.3V
+12V
+5V PWROK
12
24
RSVD
GND
+5V
GND +5V GND
+5V
GND
12V
13