Integrated Peripherals - Foxconn NF4UK8AA series User Manual

Integrated Peripherals

IDE Function Setup
Press <Enter> to set the items about IDE function. Please refer to page 40.
RAID Config
Press <Enter> to set RAID Config. Please refer to page 41.
Onchip USB (Default: V1.1+V2.0)
This item is used to enable or disable the onboard USB controller.
Selecting V1.1+V2.0 enables the system to support both USB 1.1 and USB
2.0 specification.
USB Memory Type (Default: SHADOW)
This item is used to set the type of USB Memory when data were save in
USB Keyboard/Mouse Support (Default: Disabled)
These items are used to set whether the USB keyboard/mouse controller is en-
abled in a legacy operating system (such as DOS).
USB2.0 Turning (Default: Disabled)
This item is used to enable or disable USB2.0 Turning.
USB TD Reads (Default: ISO Queue)
This item is used to set the USB TD Reads.
USB Periodic Data Reads (Default: ISO Queue)
This item is used to set the USB Periodic Data Reads.
Integrated Peripherals Menu
Chapter 3 BIOS Description
USB.
37