Foxconn NF4UK8AA series User Manual page 25

Fan Connectors: CPU_FAN, FAN1, FAN2
There are three fan connectors on this motherboard.
SENSE
+12V
1 GND
CPU_FAN
Audio Connector: CD_IN
CD_IN is Sony standard CD audio connectors,
to receive audio input from the CD-ROM, attach
its audio connector to the CD_IN audio connec-
tors on the motherboard.
S-ATA Connectors: SATA_0, SATA_1, SATA_2, SATA_3
The Serial ATA connectors are used to connect
the S-ATA devices to the motherboard. These
connectors support the thin Serial ATA cables
for primary internal storage devices. The cur-
rent S-ATA interface allows up to 3Gb/s data trans-
fer rate. Refer to RAID manual on how to set up
SATA RAID configurations for details.
1394 Connector: F_1394 (optional)
The 1394 expansion cable can be connected to ei-
ther the front (provided that the front panel of your
chassis is equipped with the appropriate interface)
or the rear panel of the chassis.
Chapter 2 Installation Instructions
1
GND
+12V
SENSE
FAN1
1
GND
+12V
SENSE
FAN2
CD_R
GND
CD_L
CD_IN
GND
TX+
TX-
GND
RX-
RX+
GND 1
SATA_0/SATA_1
SATA_2/SATA_3
1 2
TPA+ TPA-
GND GND
TPB-
TPB+
+12V +12V
GND
9 10
F_1394
17