Foxconn NF4UK8AA series User Manual page 46

USB Asyn Data Reads (Default: non-ISO Queue)
This item is used to set the USB Asyn Data Reads.
AC97 Audio (Default: Auto)
This item is used to set whether onboard AC97 audio is enabled. Dis-
abled the controller if you want to use other controller cards to connect an
audio device.
MC97 Modem (Default: Auto)
This item is used to set whether onboard MC97 modem is enabled.
MAC Lan (Default: Auto)
Setting to Auto allows the BIOS to auto-detect the NVIDIA LAN controller and
enable it.
Onboard 1394 Controller (Default: Enabled)
This item allows you to enable or disable the onboard IEEE 1394 controller.
IDE HDD Block Mode (Default: Enabled)
This item is used to set whether the IDE HDD Block Mode is allowed.
POWER ON Function (Default: BUTTON ONLY)
This item is used to set the power on method for your PC.
KB Power ON Password
When the POWER ON Function is set to Keyboard, use this item to set the
password.
Hot Key Power ON (Default: Ctrl-F1)
When the POWER ON Function is set to Hot KEY, use this item to set the
hot key combination that turns on the system.
Onboard FDC Controller (Default: Enabled)
This item is used to set whether the onboard FDC controller is enabled.
Onboard Serial Port 1 (Default: 3F8/IRQ4)
This item is used to assign the I/O address and interrupt request (IRQ) for
the onboard serial port 1. This item cannot be adjusted.
Onboard Serial Port 2 (Default: 2F8/IRQ3)
This item is used to assign the I/O address and interrupt request (IRQ) for
the onboard serial port 2. This item cannot be adjusted.
38
Chapter 3 BIOS Description