How To Recall A Setup For Measurements - Fluke 805 User Manual

How to Recall a Setup for Measurements

You can recall a Setup file from memory for frequent
measurements done on the same machine. A Setup file
saves time when the parameter selection is already done
and stored to memory.
To recall a Setup from memory:
1. Push  to open the MEMORY screen.
2. Push  and  to highlight View Setups.
3. Push  to opens the VIEW SETUPS
screen with three sorting options:
by Name: shows a list of machine setups by
machine ID in alphabetical sequence.
by Category: shows a list of machine setups
by Machine Category in alphabetical
sequence.
4. Push  and  to highlight an option.
5. Push  to open the list of setups.
6. Push  and  to highlight a setup.
7. Push  to open the setup record.
gqi72.bmp
8. Push .
Push  before you apply the Meter to the test
surface.
9. Push Meter onto test surface until green LED turns
on.
10. Wait until the green LED turns off.
Last Used: shows the last used machine ID.
Note
Vibration Meter
About Measurements
gqi73.bmp
29