805
Users Manual
7. Push to set the range and open the
Create Setups menu for the First Level ID.
8. Push and to highlight a letter or number.
9. Push to set the letter or number.
10. Repeat steps 8 and 9 to make a unique name for
the setup.
11. Push .
The Meter prompts you to give the setup a Second
Level ID. The Yes option opens the menu to key in
a name for the ID.
12. Push .
You can continue this process and set up as many
Second Level IDs as necessary for the job. For
example, you can enter the bearing number that
24
the measurement is taken from, such as,
Bearing_1 on FAN1.
gqi94.bmp
When done, select No to go back to the Setup
menu. To recall a setup, see View Setups on
page 32.
Add to Setup
You can add a Second Level ID to a setup in the Meter
memory at any time.
To add a new Second Level ID:
1. Push .
2. Push and to highlight Add to Setup.
gqi18.eps