Power On; Power Off - Fluke 805 User Manual

805
Users Manual

Power On

Push  to turn on the Meter. See Table 3 for the control
location.
Before you use the Meter for the first time, install
the new batteries (see Battery Replacement on
page 40).
When the Meter is turned on, the default Measurement
screen shows on the Meter.

Power Off

A soft shutdown is the preferred method to turn off the
Meter:
1. Push .
2. At the prompt, select Yes.
8
Note
3. Or, select No to continue with operation.
If the Meter locks up or becomes inoperable, a hard
shutdown can be used to turn off the Meter:
Use a hard shutdown only as a last recourse as it
can cause data loss. After a hard shutdown, start
the Meter and verify the data in Memory.
1. Push and hold  for more than 2 seconds.
gqi49.bmp
2. Push  to restart the Meter.
If Meter does not restart or the problem persists,
contact Fluke.
Note
gqi50.bmp