General Maintenance; Care; How To Clean; Battery Replacement - Fluke 805 User Manual

805
Users Manual

General Maintenance

Maintenance is not necessary for the Meter.
W Caution
No part of the Meter is serviceable by the user.
Do not try to open the Meter.
W Caution
To prevent damage to the Meter or any
performance loss, do not put the Meter in
temperature extremes. The ambient operating
temperature is -20 °C to 50 °C (-4 °F to 122 °F)
with a humidity of 10-95% RH (non-condensing).

Care

Care should be taken to prevent scratches on the IR
temperature sensor window.
W
To prevent damage to the IR temperature
sensor and vibration sensor, do not hit, shake,
or let the Meter fall. A damaged sensor
decreases the diagnostic quality.
40
Caution

How to Clean

For the best accuracy of temperature measurements,
clean the IR temperature sensor window with moist cloth
before you take measurements. Clean the external case of
the Meter at regular intervals with a moist cloth and a weak
detergent solution.
W
To prevent damage or performance loss, keep
the Meter dry. Do not put the Meter into any
liquid. The Meter is not waterproof.

Battery Replacement

Before the Meter operates for the first time, install
the new batteries included with the shipment.
The Meter operates on two AA non-rechargeable lithium
batteries.
To replace the batteries:
1. Loosen the two screws and remove the battery
cover from the Meter, see Figure 11.
2. Align the batteries into the battery slot with the
correct polarity.
3. Replace the battery cover and tighten the screws.
Select the correct battery type in the Battery
Selection menu. See page 13 for more
information.
Caution
Note
Note