Before You Start; Unpack And Inspect; Storage; Battery - Fluke 805 User Manual

Electromagnetic Interference .............. Standard EN 61000-4-3
RE ............................................... Standard CISPR 11, Class A
EMI, RFI, EMC, RF ..................... EN 61326-1:2006,
[1] This product meets requirements for industrial (Class A) electromagnetic wave
equipment and the seller or user should take notice of it. This equipment is
intended for use in business environments and is not to be used in homes.

Before You Start

This section helps you to know the Meter parts, controls,
connections, and status LEDs.

Unpack and Inspect

Carefully unpack and inspect the:
805 Vibration Meter
Storage case
USB Cable
Quick Reference Guide
CD (includes MS Excel template and documentation)
Belt Holster
AA (4) Lithium non-rechargeable batteries

Storage

When not in use, always keep the Meter in the supplied
storage case. The custom interior of the case supplies
protection for the Meter, documentation, and accessories.
EN 61326-2-2:2006
Class A Equipment (Industrial
Broadcasting & Communication
[1]
Equipment)

Battery

Before you use the Meter for the first time, install the two
AA lithium non-rechargeable batteries (included). See
Battery Replacement on page 40 for more information.
The Meter also operates on two AA alkaline (3 v) batteries.
Due to short battery life, alkaline batteries are not
recommended.
Set the battery type in the Device Settings menu.
See page 13.
The Meter does not include a rechargeable function. You
must externally charge the batteries.
 shows on the display when battery power is low.
Replace the batteries before you continue to use the
Meter.
Vibration Meter
Before You Start
Note
5