Iso 10816-7; Export Data - Fluke 805 User Manual

Group 2: Medium-sized machines with rated power
above 15 kW up to and including 300 kW, electrical
machines with shaft height 160 mm ≤ H <315 mm.

ISO 10816-7

This standard is used to evaluate machine vibration on
rotor dynamic pumps by measurements on nonrotating
parts.
The standard includes guidance for
measurements on rotating shafts, but this portion
is not applicable to the Meter.
Key terms
Category I: Pumps that require a high level of
reliability, availability, or safety (for example, pumps for
toxic and hazardous liquids, critical applications, oil
and gas, special chemical, and nuclear or power plant
application).
Category II: Pumps for general or less critical
applications (for example, pumps for non-hazardous
liquids).
Note

Export Data

The export data feature lets you move data from the Meter
to a PC through the USB connection. The product CD
supplies a custom Microsoft Excel template that helps you
to evaluate the measurements. The template includes
fields for:
Device ID (the Meter from which the data was
downloaded)
Machine ID (the machine on which the test was
performed, machine ID may contain two levels)
Machine Category (such as pump or compressor)
High frequency/bearing measurement (Crest Factor+)
Low frequency reading (overall vibration)
Temperature
Time and Date
To copy the Trending template:
1. Turn on the PC or Laptop and put the product CD
into the CD-ROM drive.
2. Locate the Trending template on the CD and save
a copy to a destination on the PC or Laptop.
To export data and use the Trending template to plot a
graph:
1. Make sure the Meter is off.
2. Connect the USB cable between the PC and the
Meter. The Meter turns on and stays on when it is
Vibration Meter
Export Data
37