To set a palette:
1. Push V.
2. Push R/S to highlight Measurement.
3. Push U or Y to view the menu.
4. Push R/S to highlight Image.
5. Push U or Y to view the menu.
6. Push R/S to highlight Palette.
7. Push U or Y to view the menu.
8. Push R/S to highlight Standard or Ultra Contrast.
9. Push R/S to select a palette.
10. Push:
U to set the change and go back to the live view.
V or X to set the change and go back to the previous menu.
W to cancel the change and go back to the live view.
®
IR-Fusion
®
IR-Fusion
makes it easier to understand infrared images through the use of an
aligned visible image and infrared image. The Imager automatically captures a
visible image with every infrared image to show you exactly what you see and
then allows you to more effectively show it to others.
IR-Fusion has different modes that vary by model, see Table 7. Full Visible
mode is also available. (The Fluke Ti100 does not have IR-Fusion and can
only display a full infrared image.)
Table 7. Infrared and IR-Fusion Modes by Model
Full IR
PIP IR
Full AutoBlend (min, mid, max)
Full Visible
PIP (picture-in-picture) AutoBlend
(min, mid, max)
Ti100 Ti110 Ti125 TiR110 TiR125
Thermal Imagers
Menus
27