Settings Menu; Units; File Format - Fluke Ti100 User Manual

Settings Menu

The Settings menu has adjustments for user preferences such as units of
temperature measurement, file format of stored data, auto off settings, date,
time, and language. This menu also has a section that displays information
about the Imager such as model number, serial number, and firmware versions.

Units

To change the temperature units:
1. Push V.
2. Push R/S to highlight Settings.
3. Push U or Y to view the menu.
4. Push R/S to highlight Units.
5. Push U or Y to view the menu.
6. Push R/S to highlight an option.
7. Push:
U to set the change and go back to the live view.
V or X to set the change and go back to the previous menu.
W to cancel the change and go back to the live view.

File Format

Data can be saved to the SD memory card in different file formats. Image
format selections are .bmp, .jpg, and .is2. Video format selections are .avi and
.is3. These selections remain valid when you turn the Imager off or on.
To change the file format:
1. Push V.
2. Push R/S to highlight Settings.
3. Push U or Y to view the menu.
Push R/S to highlight File Format.
4.
5. Push U or Y to view the menu.
6. Push R/S to highlight an option.
Thermal Imagers
Menus
37