Ir-Fusion ® Technology - Fluke Ti300 User Manual

To switch between palettes:
1. Go to Image > Palette > Standard or Ultra Contrast.
2. Push / to highlight a palette.
3. Push  to set the new palette.
To change the palette color:
1. Go to Image > Palette > Set Palette.
2. Push / to highlight the palette color.
3. Push  to set the new palette color.
Saturation Colors is an option that you can choose as off, standard, red/blue, or
white/black.
®
IR-Fusion Technology
®
IR-Fusion technology makes it easier to understand, analyze, and
communicate infrared images through the use of an aligned visible image and
infrared image. The Imager automatically captures a visible image with every
infrared image to show you precisely where a potential problem might be, and
then allows you to more effectively communicate it to others.
®
IR-Fusion technology has different modes:
Picture-in-Picture (PIP) AutoBlend (min, mid, max)
Full AutoBlend (min, mid, max)
Visible
The visible image and infrared image can be customized or separated
in SmartView and SmartView Mobile Software when you use the .is2
file format.
To set the IR-Fusion
1. Go to Measurement > Image > IR-Fusion.
2. Push / to highlight an option.
3. Push  to set the new option.
Note
®
technology mode:
Thermal Imagers
Menus
29