Thermal Imagers
How to Use the Menus
How to Use the Menus
The menus, coupled with the three function buttons (U, V,
W) and arrow buttons, are the access for thermal image display, camera
features, memory review, and settings for date, time, language, units, file
format, and Imager information.
To open the primary menu, push V or Y. The primary menu shows
five secondary menus for Measurement, Image, Camera, Memory, and
Settings. The text above each function button (U, V, W)
applies to that button throughout all menu screens.
Push V to open the primary menu and push R/S to cycle
through the secondary menus. Each secondary menu lists an options menu.
Push R/S to cycle through the options.
The primary, secondary, and option menus close 10 seconds after the last push
of a function button. The option selection menu stays open until you make the
selection, go up a menu level, or cancel the action.
Image Capture
Point the imager at the object or area of interest. Make sure that the object is in
focus. Pull and release the primary trigger. This will capture and freeze the
image. To cancel the captured image, pull the primary trigger again or
W to return to the Live view.
Depending on the selected file format settings, the Imager shows the captured
image and a menu bar. The menu bar lets you save the image, edit some image
settings, and add voice annotation or IR-PhotoNotes. To change the file
format, see File Format on page 37.
11