Fast Auto/Manual Range Toggle; Fast Auto Rescale; Level For Manual Operation Mode - Fluke Ti100 User Manual

Fast Auto/Manual Range Toggle

When NOT in a menu mode, push U for ½ second to toggle between
Auto Range and Manual Range.

Fast Auto Rescale

When in Manual Range and NOT in a menu mode, push W for ½ second
to automatically rescale the level and span range for objects in the thermal
field of view. This feature operates the Imager in a semi-automatic mode if
manual fine re-adjustment of level and span with the arrow buttons is not
necessary. Rescaling can be done as often, or as little, as needed.
The Imager always powers up in the same Range mode, Auto or
Manual, as when it was powered down.

Level for Manual Operation Mode

When put into manual ranging, the level setting moves the thermal span up or
down within the total temperature range. See Figure 3. In the live manual
mode, the arrow buttons are always available to adjust the level and span.
To set the level:
1. Push R to move the range to a higher temperature level.
2. Push S to move the range to a lower temperature level.
While you adjust the manual level, the scale along the right side of the display
shows the thermal span as it moves to different levels within the total range.
Note
Thermal Imagers
Menus
17