Language
To change the display to a different language:
1. Push V.
2. Push R/S to highlight Settings.
3. Push U or Y to view the menu.
4. Push R/S to highlight Language.
5. Push U or Y to view the menu.
6. Push R or S to change the setting.
7. Push U to set a new language.
8. Push:
U to set the change and go back to the live view.
V or X to set the change and go back to the previous menu.
W to cancel the change and go back to the live view.
Imager Information
You can access information about the Imager from the Settings Menu. This
includes:
Model
Camera serial number
Refresh rate
Engine serial number
Firmware version
FPGA #
Factory calibration date
Production date
To display the Imager Info:
1. Push V.
2. Push R/S to highlight Settings.
3. Push U or Y to view the menu.
4. Push R/S to highlight Imager Info.
Thermal Imagers
Menus
41