Video Recording; Video Playback; Laser Pointer - Fluke Ti100 User Manual

Video Recording

To record:
1. Pull the primary trigger to start recording. The r icon shows in the
upper left corner or the display and the recording time graphic at the
bottom of the display shows the remaining time.
2. Pull the primary trigger to pause recording. The p icon shows in the
upper left corner or the display.
3. Push V to end the recording session.
4. Push U to save the video file. The Imager displays the VIDEO
menu as a prompt to disable the feature or continue in the same mode.

Video Playback

To playback:
1. Push V.
2. Push R/S to highlight Memory.
3. Push Y to view the thumbnails of saved files.
4. Push R S X Y to highlight a file for playback. All .avi files
show the k icon in the upper right corner of the thumbnail.
5. Push U to set a file for playback.
6. Push U to start the playback. The i icon shows in the upper left
corner of the display if an audio file is attached to the video file.
7. During playback, push X or Y for fast forward and rewind. Push
U to continue normal playback.
8. Push W to exit the playback mode.

Laser Pointer

The laser pointer is a sighting aid and is offset from the infrared camera. As a
result, it may not always represent the exact center of the infrared or visible
image.
The laser dot does not appear on an infrared-only image, but does on visible-
only or AutoBlend images. The laser dot cannot be seen in the visible channel
of the IR-Fusion image if obscured by the center point marker graphic.
Thermal Imagers
Menus
33