Sr Xenpak; Lr Xenpak; Er Xenpak - Extreme Networks e” series Hardware Installation Manual

SR XENPAK

Table 102 describes the specifications for the SR XENPAK module.
Table 102: SR XENPAK module specifications
Parameter
Average launch power min
Channel insertion loss:
62.5 μm (160/200 MHz*km)
62.5 μm (200 MHz*km)
50 μm (400 MHz*km)
50 μm (500 MHz*km)
50 μm (2000 MHz*km)
Wavelength range
Operating distance range
(depends on type and modal bandwidth)
62.5 μm MMF (160 MHz*km)
62.5 μm MMF (200 MHz*km)
50 μm MMF (400 MHz*km)
50 μm MMF (500 MHz*km)
50 μm MMF (2000 MHz*km)
Maximum receiver sensitivity in OMA
The SR XENPAK supports multimode fiber (MMF) and has an SC connector.

LR XENPAK

Table 103 describes the specifications for the LR XENPAK module.
Table 103: LR XENPAK module specifications
Parameter
Average launch power
Optical link budget
Wavelength range
Distance range
Maximum receiver
sensitivity in OMA
The LR XENPAK supports single-mode fiber (SMF) and has an SC connector.

ER XENPAK

Table 104 describes the specifications for the ER XENPAK module.
Table 104: ER XENPAK module specifications
Parameter
Average launch power
Optical link budget
Wavelength range
Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide
Minimum
-7.3 dBm
840 nm
Minimum
-7.3 dBm
1260 nm
2 m
Minimum
-4.7 dBm
1530 nm
Maximum
1.6 dB
1.6 dB
1.7 dB
1.8 dB
2.6 dB
860 nm
26 m
33 m
66 m
82 m
300 m
-11.1 dBm
Maximum
0.5 dBm
6.2 dB
1355 nm
10 km
-12.6 dBm
Maximum
4.0 dBm
10.9 dB
1565 nm
XENPAK Specifications
345