Extreme Networks e” series Hardware Installation Manual page 179

CAUTION
To prevent ESD damage, handle the module by the metal panel edges only. Never touch the
components on the PCB or pins on any of the connectors.
5 Immediately place the removed module into an antistatic bag to protect it from ESD damage and to
prevent dust from collecting on the module connectors.
6 Install a replacement SMMi, following the installation procedure described on page 177.
Leave the ESD strap permanently connected to the chassis so that it is always available when you need
to handle ESD-sensitive components.
Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide
Replacing SMMi Modules
179