Table of Contents
Advertisement
Alpine 3800 Series Switch Management Module
The SMMi has the following out-of-band management ports:
• Console port—Used to connect a terminal and perform local management.
• Management port—Used to connect an Ethernet cable directly from your laptop into the
management port to view and locally manage the switch configurations.
• Modem port —Used to connect a modem for remote access to the CLI.
• PCMCIA slot—Reserved for future use.
See "Management Ports" in Chapter 1 for more information about management ports. For specifications
of the Alpine SMMi module specifications, see Appendix C, "Module Technical Specifications."
SMMi Memory
The SMMi has two 144-pin SODIMM sockets, and ships with two 128 MB SODRAM modules installed,
as shown in Figure 99.
NOTE
The SMMi supports only the SODIMMs that are supplied by Extreme Networks.
Figure 99: SMMi SODIMM sockets
SMMi LEDs
Table 34 describes the LED activity on the SMMi.
Table 34: SMMi LEDs
LED
Color
DIAG
Green blinking
Off
STATUS
Green blinking
Yellow blinking
Off
PSU A
Green
PSU B
Amber
Off
176
Indicates
Power-on Self Test (POST) is running
Normal operation
Normal operation
Critical error, fan failure or over temperature
Unit powered down
PSU is OK
DC output failure
PSU not present or not powered
38_SODMs
Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide
Advertisement
Table of Contents
