Xenpak Specifications; Sr Xenpak - Extreme Networks Alpine 3802 Hardware Installation Manual

Module Technical Specifications
Table 101: ZX mini-GBIC specifications
Parameter
Transceiver
Optical output power
Center wavelength
Receiver
Optical input power sensitivity
Optical input power maximum
Operating wavelength

XENPAK Specifications

NOTE
Use only Extreme Networks-approved XENPAK modules in all Extreme Networks devices.

SR XENPAK

Table 102 describes the specifications for the SR XENPAK module.
Table 102: SR XENPAK module specifications
Parameter
Average launch power min
Channel insertion loss:
62.5 μm (160/200 MHz*km)
62.5 μm (200 MHz*km)
50 μm (400 MHz*km)
50 μm (500 MHz*km)
50 μm (2000 MHz*km)
Wavelength range
Operating distance range
(depends on type and modal bandwidth)
62.5 μm MMF (160 MHz*km)
62.5 μm MMF (200 MHz*km)
50 μm MMF (400 MHz*km)
50 μm MMF (500 MHz*km)
50 μm MMF (2000 MHz*km)
Maximum receiver sensitivity in OMA
The SR XENPAK supports multimode fiber (MMF) and has an SC connector.
344
Minimum Typical
-2 dBm 0 dBm
1540 nm 1550 nm
-23 dBm
1540 nm 1550 nm
Minimum
-7.3 dBm
840 nm
Maximum
3 dBm
1570 nm
-3 dBm
1570 nm
Maximum
1.6 dB
1.6 dB
1.7 dB
1.8 dB
2.6 dB
860 nm
26 m
33 m
66 m
82 m
300 m
-11.1 dBm
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide