Features And Controls - Troy-Bilt 1924 Owner's Manual

Features and Controls
KNOWYOLiR GENERATOR
Read this owner's manual and safety rules before operating your generator.
Compare this illustration with your generator to familiarize yourseff with the locations of various controls and
adjustments. Save ths manual for future reference.
Rod<er Switch
Fuel Tan[< Recoil Starter
Oil Fill Cap/Dipstick
120 Volt AC, 20 Amp /
Duplex Receptacles _
\
Choke Lever
Air
Cleaner
Circuit Breakers
120/240 Volt AC,
20 Amp Receptacle
Grounding Fastener
Data Tag
[ 20 Volt AC, 20 Amp, Duplex Receptacles -- Hay be
used to supply electrical power for the operation of
120 Volt AC, 20 Amp, single phase, 60 Hz electrical, lighting,
appliance, tool and motor loads.
i 20/240 Volt AC, 20 Amp Locking Receptacle -- Hay
be used to supply electrical power for the operation of
120 and/or 240VoltAC, 20 Amp, single phase, 60 Hz
electrical, lighting, appliance, tool and motor loads.
Air Cleaner -- Uses a dry type filter element to limit the
amount of dirt and dust sucked into the engine.
Choke Lever -- Used when starting a cold engine.
Circuit Breakers (AG) -- Push to reset circuit breakers are
provided to protect the generator against electrical overload.
DataTag -- Provides mode[, revision and serial number of
generator. Please have these readily available when calling
for assistance.
Fuel Tank -- Capacity of four (4) U.S. gallons.
Grounding Fastener -- If required, please consult a
qualified electrician, electrical inspector, or local agency
having iurisdiction.
Oil Fill Cap/Dipstick -- Check and fill engine with oil
here.
Recoil starter -- Used to start the engine.
Rocker Switch -- Set this switch to "On" before using
recoil starter. Set switch to "Off' to switch off engine.