Models34022, 34022C, 34322 And34322C (Variable Speed) - Troy-Bilt 34020C Owner's/Operator's Manual

MODELS34022, 34022C, 34322 AND34322C (VARIABLE SPEED)
Operator Presence
ControlBar
EngineSpeed
Lever
Wheel Drive Lever &
Wheel Speed
AdjustmentKnob
In addition to the features and
controls shown on Page 10,
Models 34022, 34022C, 34322
and 34322C have the features
and controls described below.
Engine Speed Lever
This control (see Figure 3-4) regu-
lates the speed of the engine and
the blade. For best mower perfor-
mance, run the engine at FAST
speed. Using this control is fully
described in the Operation
Section.
Operator Presence Control
Bar
This model is equipped with an
Operator Presence Control Bar
(see Figure 3-4). When this con-
trol is released during mower op-
eration, the mower engine, blade,
and wheels stop. Using this
control is fully described jn the
Operation Section.
Wheel Drive Lever
Figure 3-4: Variable Speed Model
The Wheel Drive Lever (shown in
Figure 3-4), controls the forward
speed of the mower and the
engagement and disengagement of
the wheel drive. The Wheel Speed
Adjustment Knob has speed set-
tings from SLOW (1) to FAST
(5). The use of this control is fully
described in the Operation
Section.
13