Models 34021, 34021C, 34321 And34321C (Singlespeed) - Troy-Bilt 34020C Owner's/Operator's Manual

MODELS 34021, 34021C, 34321 AND34321C (SINGLESPEED)
Operator Presence
Control Bar
EngineSpeed
Lever
Figure 3-3: Single Speed Model.
Wheel Drive
Lever
/
In addition to the features and
controls shown on Page 10,
Models 34021, 34021C, 34321C
and 34321C have the features
and controls described below.
Engine Speed Lever
This control (see Figure 3-3) regu-
lates the speed of the engine and
the blade. For best mower perfor-
mance, run the engine at FAST
speed. Using this control is fully
described in the Operation
Section.
OperatorPresenceControl
Bar
This model is equipped with an
Operator Presence Control Bar
(see Figure 3-3). When this
control is released during mower
operation, the mower engine,
blade, and wheels stop. Using this
control is fully described in the
Operation Section.
Wheel Drive Lever
Move the Wheel Drive Lever (see
Figure 3-3) forward to the
ENGAGE position to turn the
wheels in a forward direction.
Move the lever back to the DIS-
ENGAGE position to stop the
wheels. The forward speed is set
at the factory at approximately
2-1/2 mph. Using this control and
changing the factory-set speed is
fully described in the Operation
and Maintenance Sections.
12