How To: Create Adaptive Cli Example; Scheduling Actions - Dell OpenManage Network Manager Client Manual

How To:
Create Adaptive CLI Example
The following describes the basics of creating and using Adaptive CLIs.
Create a new Adaptive CLI. Right-click and select New.
1
In the Attributes panel, create attributes named required and optional.
2
In the Script panel define the Attribute Delimiter (< >) and Optional Attributes Delimiter
3
([ ]) and enter the following three scripts:
show run
show <Required>
show [Optional]
Save this Adaptive CLI execute it with action > Execute.
4
When executing, select a target.
5
Click Next. The Show Run command results appear. These are searchable with the job screen.
6

Scheduling Actions

You can schedule actions with a right-click in the Actions Portlet or the Schedules Portlet. This
opens an editor with the following screens:
• General
• Parameters
• Schedule
See Schedules Portlet on page 95 for more scheduling actions with that portlet. Schedules created
in the Actions Portlet also appear in the Schedules Portlet.
Perl Scripts | Actions and Adaptive CLI
369